Solar Light 20 LEDs Outdoor PIR Motion Sensor Lights IP65 Waterproof 120 Degree Sensing Wide Angle Lighting

$13.99 USD

Inventory is limited. Each account can only purchase one.

Ends in 05:00:00

32 viewing now

Stock level:

Low stock

Arrives between Friday, November 6th and Wednesday, November 11th

☀️ Solar Motion Sensor Lights for Smarter Outdoor Lighting

Light up dark outdoor areas automatically with 20 bright LEDs, a wide-angle PIR motion sensor, and solar-powered convenience. No electrical wiring or power adapter needed.

💡 20 LEDs • 🌙 Motion Activated • ☀️ Solar Powered • 🌧️ IP65 Rated

🌙 Make Dark Outdoor Areas Easier to Navigate

Dark driveways, garden paths, garage entrances, and side yards can be inconvenient to navigate after sunset. A motion-activated light illuminates the area when movement is detected, so you don't have to switch on a light manually every time you pass by.

✨ Solar Charging by Day. Light When Motion Is Detected.

The built-in solar panel charges the rechargeable battery during daylight. At night or in darkness, the PIR sensor activates the light when movement is detected within its sensing range. Once triggered, the light stays on for approximately 15 seconds before switching off automatically.

💡

20 Bright LED Beads

Features 20 cool-white LEDs with a 6000K–6500K color temperature to illuminate outdoor entrances, pathways, fences, and other dark areas.

👣

120° PIR Motion Detection

Detects movement within a range of up to 3 m, with a 120° sensing angle for coverage around suitable outdoor locations.

☀️

Solar-Powered Operation

A 0.55W solar panel charges the built-in rechargeable battery, helping reduce the need for wired power and disposable batteries.

🌙

Automatic On/Off at Night

The light stays off during daylight to conserve stored energy and switches to bright illumination when motion is detected in darkness. There is no dim-light mode.

🌧️

IP65 Outdoor Protection

The ABS housing is rated IP65 for protection against dust and water jets, making it suitable for many exposed outdoor locations when correctly installed.

🔧

Simple Wireless Installation

Mount the light using the included screws in a location that receives sufficient sunlight. No household power wiring or adapter is required.

🏡 Where Can You Install It?

Place the light near outdoor areas where extra visibility is useful after dark, choosing a position with good sunlight exposure for daytime charging.

🚪 Front Door

🚗 Driveway

🏠 Garage

🌿 Garden

🪴 Patio & Deck

🚶 Pathways

🏡 Backyard

🪵 Fence

🌳 Side Yard

🔧 Get Started in 3 Simple Steps

Activate the Light

Press the ON/OFF button to activate the light and remove any protective film from the solar panel.

Charge in Sunlight

Place the panel in direct sunlight. Allow sufficient charging time before testing, ideally about 8 hours in suitable sunlight.

Test & Install

Cover the solar panel to simulate darkness and test the motion sensor. Once working, mount the light in a sunny location.

☀️ For first-time use, allow the light to charge fully before testing. Actual charging time and runtime depend on sunlight, weather, installation angle, battery condition, and how frequently the sensor activates.